PFC Corofil Fastight Curtain Wall Barrier is a stone wool product applied with PFC Corofil Fastight Coating, installed between curtain walling and the concrete slab edge of a building to reinstate the fire resistance performance of the cavity. PFC Corofil Fastight Curtain Wall Barrier has been tested to EN1364-4 and will provide up to 120…
An upgrade solution for fire protection between stud wall partitioning. Tested in accordance with BS 476 Part 22 PFCTS CW Fire Protection System provides up to 60 minutes integrity and insulation fire protection. The PFCTS CW Fire Protection System provides a method of improving the fire and acoustic properties of existing timber stud partitions in…
PFCTS CF PFCTS CF Fire Protection System provides a method of increasing the fire resistance of timber compartment floors without the need for removing ceilings. This system is also not reliant on any ceiling type to achieve its fire rating. Provides a minimum 1 hour fire protection for both integrity and insulation with a weight…
TDSCOSI PFC Corofil Open State Insert is designed for use with the PFC Corofil Open State Barrier COSB 25 (1024). PFC Corofil Open State Insert is a 150mm wide strip of 110kg/m³ density, non-combustible stone wool, the thickness required is dependent on the depth of the cassette panel up to 31mm deep. PFC Corofil Open…
TDSCCFB PFC Corofil Cavity Fire Barrier CCFB is a full fill cavity fire barrier manufactured from a 100mm thick low density stone wool product installed between the inner and outer substrates of a masonry façade to reinstate the fire resistance performance of the cavity. The lighter density allows greater scope for compression when installing within brickwork…
TDSCCFS with DPC Classified to EN13501-2, 3rd Party certification IFCC1667. PFC Corofil Cavity Fire Stop with DPC is a stonewool product with an integral polythene DPC adhered to its outer face. It has been tested to EN1366-4 in cavity widths up to 200mm and will provide 120 minutes of fire integrity and insulation performance. View…
Cavity Fire Stop Strips / Blocks A full fill cavity fire barrier that can be used horizontally and vertically. PFC Corofil Cavity Fire Stop full fill cavity barrier is a stone wool product installed between the facade and the inner structure of a building to reinstate the fire resistance performance of the cavity. Tested to…
TDSCCFS For installation within building cavities between the façade and the inner structure. All tested cavity widths and substrate specifications along with their fire resistance performance can be found on the technical data sheet TDSCCFS. View NBS Source View/Download datasheet(s): DATASHEET Key points: Applications provide up to 120 minutes fire integrity and insulation performance. Suitable…
COSB 44 A 44mm Open State Cavity Barrier for use in ventilated facade systems, reacting in the event of fire to help prevent the spread of fire. PFC Corofil 44mm Open State Barriers combine non-combustible high-density stone wool with a high expansion intumescent strip fixed to the outer face. Depending on the product ordered, it…
COSB 25 An Open State Cavity Barrier for use in ventilated facade systems, reacting in the event of fire to help prevent the spread of fire. PFC Corofil Open State Cavity Barriers combine non-combustible high-density stone wool with a high expansion intumescent strip fixed to the outer face. Depending on the product ordered, it will…
