PFC Corofil Fastight Curtain Wall Barrier CFCW
PFC Corofil Fastight Curtain Wall Barrier is a stone wool product applied with PFC Corofil Fastight Coating, installed between curtain walling and the concrete slab edge of a building to reinstate the fire resistance performance of the cavity.
PFC Corofil Fastight Curtain Wall Barrier has been tested to EN1364-4 and will provide up to 120 minutes fire integrity and insulation performance.
PFC Corofil Fastight Curtain Wall Barrier is supplied as 150mm wide x 100mm deep x 1000mm long sections with PFC Corofil Fastight Coating factory applied to the top surface, to allow for cutting to size on site.
Where should you use Fastight Curtain Wall Barrier?
PFC Corofil Fastight Curtain Wall Barrier has been designed and tested to be installed horizontally within building cavities up to 225mm wide between curtain walling and the concrete slab edge.
The fire resistance performance varies depending on the barrier used and the application it is installed within (please see the performance data table on page 5 of the datasheet).
For full installation instructions for the Fastight Curtain Wall Barrier please refer to the datasheet.
Key points:
- Suitable for cavities up to 225mm
- Can be installed horizontally against masonry substrates to a spandrel panel with 25mm thick calcium silicate board
- Supplied with PFC Corofil Fastight Coating factory applied
- Provides up to 120 minutes fire integrity and insulation performance
Intended Use:
PFC Corofil Fastight Curtain Wall Barrier has been designed and tested to be installed horizontally within building cavities up to 225mm wide between curtain walling and the concrete slab edge.
This datasheet shows the only applications the product has been tested in. Please ensure the product has been tested in and is suitable for your application (see PFC Corofil terms and conditions 13.1.1).
